Sectional garage doors Trend
Trend series is a popular solution for garages located in regions with temperate and cold climate. Reliable, warm and silent doors will protect your car from bad weather.
Door design provides protection against finger trapping which guarantees the products safety during manual opening and closing or when cleaning them.
High quality at reasonable price
Trend garage doors is the choice of millions of customers in the CIS countries and Europe. The products provide great thermal insulation of the garage. There are various design options to choose from.
The invisible PUR-PA coating with polyamide particles makes the sandwich panels surface slightly rough and protects it from damage.
for your garage
Standard colours of sandwich panels
ALUTECH offers a wide range of colours. Therefore, different types of sandwich panels are painted in certain standard colours. The available colours may differ even for panels of the same type but with different surface patterns.
|White (RAL 9016)|
|Sepia brown (RAL 8014)|
|Silver aluminium (RAL 9006)|
|Chocolate brown (RAL 8017)|
|Grey anthracite (RAL 7016)|
|Green moss (RAL 6005)|
|Gentian blue (RAL 5010)|
|Purple red (RAL 3004)|
|Light ivory (RAL 1015)|
|Anthracite (ADS 703)|
The door surface can be smooth or woodgrain. So the chosen solution will be noticeable not only in the door look, but also in the building facade as a whole.
Woodgrain embossment imitates wood visually and to the touch. The doors made of sandwich panels with this type of surface keep an aesthetic look for a long time. Small scratches, dents and scuffs are not visible on them.
The doors made of sandwich panels with a matte silky by touch surface look neat and reserved.
for your car
Due to 40 mm thick sandwich panels and frost-resistant seals, Trend doors are suitable for garages located in regions with temperate and cold climate and allow to maintain comfortable microclimate in the premises. The door retains heat like a 55 cm brick wall.
Minimize heat losses
Over the years, the garage can shrink under the influence of temperature changes and humidity. In this case, a gap appears between the door leaf and a wall and the heat escapes through it. But due to the adjustable roller brackets, it is possible to eliminate the gap easily and quickly.
Forget about draughts
A frost-resistant EPDM seal is installed along the perimeter of the garage doors. It guarantees high heat and sound insulation, does not absorb moisture and retains elasticity at low temperatures.
Having equipped the door with automation, you will forget about the need to leave your cozy car in bad weather to open and close it manually. Just press the button on the remote control.
is required to open the door 2 m high
Easy to open the door manually
Optimally balanced springs provide comfortable manual control even of the largest doors.
is lifted with an effort of
The standard door set (free of additional charge) provides special systems that ensure the safe operation of the doors. They will protect you, your famiy members and pets from unexpected situations.
It prevents the risk of finger trapping when opening and closing the door manually, as well as when cleaning the leaf from dirt and ice crust..
It prevents the sectional door leaf from falling on a passing car or a person if the spring fails.
It is provided due to the absence of sharp edges in the door design.
It allows the cables to withstand the load significantly exceeding the leaf weight. Thus, it provides additional safety.
for the environment and the health of your family members
The production of sectional doors meets international requirements for safe and sustainable use of natural resources.
The availability of the Environmental Product Declaration (EPD) is confirmed by IFT Rosenheim Institute. Sandwich panels are totally safe for human health. To fill the space between two steel sheets of the panels we use a freon-free foamed polyurethane.
Doors that pass
the test of time
17 years of operation
The springs lifespan in Prestige doors is 25 000 open-close cycles. It corresponds to 17 years of door operation 4 times a day.
Protection against panel bubbling
Adhesive lacquer provides excellent adhesion of steel sheets to the foam inside sandwich panels, thus protecting them from bubbling. Due to this, you can install ALUTECH doors even on the sunny side of the buildings without worries.
Other door without adhesive lacquer
When the sun heats steel sheets they can fall of the foam, causing bubbles to form on the panel surface. They spoil the door look, as well as negatively affect its operation.
in any conditions
In Trend garage doors we use angle profiles with special reinforcing plates. This solution ensures the rigidity of the door frame. Moreover, reinforcing brackets of 2 mm thickness are installed along the entire door height (every 50 cm).
Quality under control 24/7
ALUTECH thoroughly controls all manufacturing processes and the quality of its products. Automated production lines allow to eliminate the risk of human factor influence and, as a result, manufacturing defects.
Reliable fastening of accessories
Self-tapping screws provide reliable fastening of hinges that connect the sandwich panels. They are located at the joints of outer and inner steel sheets and go through all four layers of metal.
Protection against delamination
Sandwich panels have a closed contour. The outer and inner steel sheets are interconnected at the top and bottom of the panel into a lock. Due to such design, the door leaf keeps its original look for many years.
are rust resistant.
in particular, angle bars and cover strips is a distinctive feature of Trend series. The use of powder coating guarantees durability of the coating.
minimizes the corrosion risk on the door elements even in high humidity conditions.
One of the most popular installation option. The balancing mechanism is placed above the door leaf. The headroom height is at least 210 mm for both manual and automatic control modes.
It is used in premises with low ceilings. The headroom height is from 100 mm for manually controlled doors and at least 140 mm for automatically controled.
It is perfect for premises with high ceilings. The minimal headroom height is 500 mm and does not depend on the control mode.
The balancing mechanism is placed on both sides along the leaf. The minimal headroom height is 100 mm for manual control and 140 mm for automatic one.
for maximum comfort
It is made of the same panels as the doors. The side door matching design will harmoniously fit into the facade of any building and complete its look.
The wicket makes it possible to enter and leave the garage without opening the door leaf itself. This allows to save the door lifespan in the long term.
Windows, transparent inserts
Transparent inserts provide natural lightening of the garage. A wide range of windows and panels allows to make the doors of individual design.