Options and Accessories for Garage Doors

Complement your garage doors with practical options and accessories to use them with maximum comfort.

We are ready to provide additional information on your questions about the products

Solutions for any needs

A wide range of options allows to solve any problem, organize an additional entry to the garage, improve its illumination, enhance burglar protection of sectional doors. Choose exactly what you need.

Perfect compatibility with the doors

Wicket, panoramic panels and a key lock, made in the matching design with the door leaf, will harmoniously complement the doors. The side doors will adorn the facade of the building as a whole.

Inbuilt wicket

The inbuilt wicket in the right- and left-handed versions makes it possible to enter the garage without opening the door itself. This helps to reduce the heat loss of the premises.

Simplicity in use

The wicket is equipped with a stylish ergonomic handle made of impact resistant material.

Saving the door lifespan

There is no need to open the door each time to enter the garage and this allows to save their lifespan.

Types of inbuilt wicket

With flat threshold (20 mm)

With low threshold (100 mm)

With standard threshold (145 mm)

With flat threshold (20 mm)

for doors up to
5 m wide

With low threshold (100 mm)

for doors up to
4.5 m wide

With standard threshold (145 mm)

for doors from
4.5 to 6 m wide

Inbuilt wicket equipment

обеспечивает автоматическое плавное закрытие калитки. Доводчик оснащен устройством фиксации калитки в открытом положении, что очень удобно, когда возникает необходимость держать ее открытой, например, при перемещении крупногабаритных предметов.

prevents the door leaf lifting if the wicket is partially closed. The sensor gives a signal and after that the motor is turned off. This device allows to avoid emergencies and, as a result, expensive repairs.

protects the premises from snow and rain if the wicket is not fully closed. Thus, the garage is always dry and warm.

realibly fixes the wicket in closed position and prevents the leaf from sagging, prolonging the lifespan of the structure.

Windows, panoramic panels

Inbuilt windows and panoramic panels provide natural lightening of the garage allowing to save on electricity.

Attractive door look

A wide range of transparent inserts allows to choose an optimal solution for a specific door. The doors with windows or panoramic inserts match with the exterior in any style — from classic to high-tech.


The number and location of windows are selected individually according to your requests.

Windows make the doors look more interesting and unusual.

Windows installation is a great opportunity to improve the garage illumination which helps to cut electricity costs. Moreover, it is more comfortable and pleasant to work and spend time in bright premises.

Key lock

A durable metal key lock protects the garage from unauthorized entry ensuring the safety of your property.


Outside view

There are 11 colours of a handle plate to choose from.


Inside view

From the inside, the key lock looks nice and neat in grey-white (RAL 9002), which is also a standard colour of sandwich panels from the inside, so they make a harmonious combination.

Outside view

There are 11 colours of a handle plate to choose from.


Inside view

From the inside, the key lock looks nice and neat in grey-white (RAL 9002), which is also a standard colour of sandwich panels from the inside, so they make a harmonious combination.

Side door

A side door is used as a separate entry to the premises. Its installation allows to save the doors lifespan as there is no need to open them when entering or leaving the garage.


Unity of style

The side door is made of the same panels as the garage door. This ensures their harmonious combination and the building facade acquires a complete look.

Protection against corrosion

Door frame and framing profiles are made of aluminium with polymeric coating. Due to this, they preserve an attractive look for many years without traces of corrosion.


Digital printing

Do you wnat your garage to look stylish? You can order the side door with the same pattern as the doors. One and the same image from the standard collection of ALUTECH prints can be applied to the door leaf using digital printing.


Side door types

SDN-1

SDN-2

SDN-Thermo

SDN-1

Frame and opening framing profiles: without thermal break

SDN-2

Frame and opening framing profiles: without thermal break

SDN-Thermo

Frame and opening framing profiles: with thermal break

SDN-1

Sandwich panel thickness: 45 mm

SDN-2

Sandwich panel thickness: 45 mm

SDN-Thermo

Sandwich panel thickness: 45 mm

SDN-1

Colour: 14 standard options

SDN-2

Colour: 14 standard options

SDN-Thermo

Colour: 14 standard options


Set of reinforcing profiles

A set of reinforcing profiles helps to increase the rigidity of the door leaf. The profiles are made of galvanized steel and installed on each sandwich panel. This set is recommended to use in doors above 3,5 m wide.

Reinforcing profiles are included in standard kit of doors above 5 m wide (supplied without extra charge).

Hide

even at temperature extremes

40°C



provides stable door leaf geometry


Additional protection for dark coloured doors

The set is recommended to be installed on dark coloured doors especially if the garage is located on the sunny side.

Increased wind resistance of door leaf

Reinforcing profiles are relevant for regions with increased wind load. They provide additional rigidity of the door leaf protecting it from strong wind gusts.

Reveal fit

Reveal fit allows to install the doors even in non-standard openings, thus helping to save time and money.


Options for cover profiles design

Decorative cover profiles can be painted in one of 4 standard colours — anthracite (ADS703), sepia brown (RAL8014), chocolate brown (RAL 8017) and white (RAL 9016), free of additional charges. It is also possible to paint them in the door leaf colour (according to RAL or DB scale).


Corrosion resistance

Aluminium cover profiles installed along the perimeter of the opening are not exposed to corrosion.

Aesthetic look

Reveal fit elements are placed behind the decorative cover profiles. This provides aesthetic door look.

For what kind of openings is it recommended to use the reveal fit?

«tunnel» type opening.

an opening without siderooms. There is only a headroom.

an opening without a headroom. There are only siderooms.

Types of reveal fit

In front of the opening

In between the opening

Behind the opening

In front of the opening

Reveal fit set art. FWO145 (FWO145/145-40)

In between the opening

Reveal fit set art. FWO100 (FWO100/145-40)

Behind the opening

Reveal fit set art. FWO100 (FWO100/145-40)

False panel

An efficient solution for non-standard openings. The false panel is used to compensate the cover profile height if the current height is not enough.


Harmonious combination with the door

Both the false panel and sectional door are made of the same sandwich panels. This ensures their perfectly matching style.


Choosing the frame colour

There are 2 standard colours for painting the false panel frame — A00-D6 (silver) and RAL 8019 (grey brown). It is also possible to paint the frame in any other colour according to RAL scale.


Set of protective covers

This set is used in the doors with tension springs. It allows to reduce the noise level when opening and closing the door and provides additional protection from accidental jamming of fingers and clothes.

Durable material

The protective cover is made of modified PVC (RPVC) which does not crack under temperature changes and retains its integrity during the entire door lifespan.

Thoughtful design

If the door needs maintenance, the protective cover can be easily disassembled and reinstalled.



Adjustable

The air grids covers can be opened to ventilate the premises and closed if not necessary.

Size: 368*130 mm
Colour: white, black
Cross-sectional area of slotted holes: 65 cm

Non-adjustable

The air grids covers are always opened, providing twenty-four-hour ventilation.

Size: 368*130 mm
Colour: white, black
Cross-sectional area of slotted holes: 65 cm



Outside view

The double-sided lock has a stylish design and does not spoil the door leaf look.


Inside view

The system looks very neat and does not attract much attention.


Advantages of break-in protection system

comply with high SKG class. The lock has double-sided reinforcement with metal plates.

does not allow the criminals to lift the leaf using a jack and enter the garage.

Reinforced brackets and protection for rollers

Reinforced brackets will not allow criminals to take the door leaf out of the tracks. Protective elements exclude the rollers drop from the track profiles in case of any impact from the outside. The rubber stopper of the vertical track profile made of galvanized steel prevents the profile deformation under the load.

Reinforced upper bracket

Upper roller brackets with reinforcing plates made of galvanized steel and steel roller pins.

Reinforced bottom bracket

The strength and rigidity of the bottom roller set is increased.

Reinforced intermediate bracket

Garage side roller brackets have been replaced with industrial ones combined with protective roller elements.

Contact us

If you have any questions about our products, please, use the form.