CUR/mini built-in radio control unit update

22-12-2020 news

ALUTECH informs about the update of the CUR/mini built-in radio control unit (Fig. 2).

The updated device has improved technical characteristics and functionality, including the following:

  • Increased maximum power of connected devices (from 300 W to 500 W) which means possibility to control ALUTECH electric drives of the AM0, AM1 and AM2 series.
  • Additional protection: it now has a varistor which increases the resistance of CUR/mini to voltage variations.
  • A separate button on the housing simulating power off, for easy recording and deleting remote controls.
  • New housing with fasteners that can be easily removed should installation conditions require this.

The updated version of CUR/mini is suitable for hidden installation in a Ø60mm mounting sleeve 60mm deep together with a KU/1 switch.

Fig. 1. Current version of CUR/mini

Fig. 2. Updated version of CUR/mini

We remind you that the CUR/mini device is designed for remote control of electric drives of roller shutter systems without a built-in radio receiver. It can be used with all ALUTECH remotes in UBS mode (three-button control) or SBS mode (one-button control). It is possible to connect external 2-key, rotary and key switches.

More details on the technical characteristics of the updated CUR/mini can be found in the table.

TECHNICAL CHARACTERISTICS OF BUILT-IN RADIO CONTROL CUR/mini
Supply voltage, V/Hz 230 (±10%)/50
Power of connected drives, W 500
ALUTECH drives series supported AM0-АМ1-АМ2
Radio frequency, MHz 433,92
Range in open space (up to), m 100
Maximum number of recorded remotes, pcs 15
Additional protection varistor
Protection degree of the housing (terminals not splash proof) IP20 (no)
Cross-section of cable wires, mm2 1,5(24-14AWG)
Configurable run time 240sec/∞
Operating temperature range, ºC -20 ... +50
Overall dimensions of the housing, mm 53 × 53 × 29,5
Weight, gr 60

The operating manual for the upgraded radio remote control CUR/mini is available at this link.

The ALUTECH Group of companies is constantly improving the range of automatic control devices for roller shutter systems, increasing their reliability and functionality as well as simplifying the operation process.

Popular
29-07-2020
Updated video guide on mounting the dock leveller ALUTECH SL

ALUTECH Group presents an updated video guide on mounting of ALUTECH SL dock leveller with swing lip. This video will help the mounting specialists to perform installation of modernised dock levellers of this series correctly and in short time.

09-09-2019
Automation for garage doors
New Levigato series motor for garage doors — LG-500

ALUTECH Group continues to develop its own automation range and informs about the launch of a new Levigato series electric motor - LG-500 designed for popular sizes of the garage doors up to 8,4 sq. m.