New built-in radio control units CUR/mini for ALUTECH rolling systems
The ALUTECH Group of companies presents a new product in the range of ALUTECH branded automation:
Built-in radio control units CUR/mini
The CUR/mini unit (Fugure 1) is designed to control the tubular motors of rolling systems or other electrical load, for example lighting, using ALUTECH remote controls (AT-1(S), AT-15(S), AT-4N). The control modes are USB (the roller shutter mode – control via three buttons) or SBS (the door mode – control via one button).
Figure 1. Radio control unit CUR/mini
Figure 2. Wiring diagram for connecting a motor to the radio control unit CUR/mini
Figure 3. Wiring diagram for connecting lighting to the radio control unit CUR/mini
Technical parameters of the new product:
| Parameter | CUR/mini |
|---|---|
| Power supply, V/Hz | 230 (±10%)/50 |
| Power of connected motors, W | up to 300 |
| ALUTECH motor series which can be connected | AM0(D)-АМ1 |
| Radio frequency, MHz | 433,92 |
| Range of operation in the line of sight, m | 100 |
| Maximum number of recorded remote controls, pcs | 20 |
| IP protection rate | IP20 |
| Operating temperature range, ºC | -20 … +50 |
| Overall dimensions, mm | 51 × 51 × 26,5 |
| Weight, g | 60 |
You can find the wiring diagram for connecting a motor and lighting to the CUR/mini unit in the operating manual.
The main advantages of the new CUR/mini unit are:
- Easy installation: the unit is installed in a standard mounting cup Ø58mm. Besides, external mounting is also possible with the use of a mounting box (recommended dimensions are 126х126х55,3 mm). For example, you can use the universal mounting box MB/IP55;
- Possibility to control lighting.
We remind you that the process of recording, copying, deleting and grouping remote controls (AT-1(S), AT-15(S), AT-4N) is described in detail in the instructions.
ALUTECH Group is constantly expanding the range of devices for automatic control of rolling systems, improving their reliability and usability.
Two extra lengths of the top curtain - 1200 mm and 1500 mm have been introduced as additional options for dock shelter ALUTECH DSF. These options provide handling the trucks with different body heights. The new options are already available for order.