New built-in radio control units CUR/mini for ALUTECH rolling systems
20.12.2018| Roller shutter systems
The ALUTECH Group of companies presents a new product in the range of ALUTECH branded automation:
Built-in radio control units CUR/mini
The CUR/mini unit (Fugure 1) is designed to control the tubular motors of rolling systems or other electrical load, for example lighting, using ALUTECH remote controls (AT-1(S), AT-15(S), AT-4N). The control modes are USB (the roller shutter mode – control via three buttons) or SBS (the door mode – control via one button).
Figure 1. Radio control unit CUR/mini
Figure 2. Wiring diagram for connecting a motor to the radio control unit CUR/mini
Figure 3. Wiring diagram for connecting lighting to the radio control unit CUR/mini
Technical parameters of the new product:
Power supply, V/Hz
Power of connected motors, W
up to 300
ALUTECH motor series which can be connected
Radio frequency, MHz
Range of operation in the line of sight, m
Maximum number of recorded remote controls, pcs
IP protection rate
Operating temperature range, ºC
-20 … +50
Overall dimensions, mm
51 × 51 × 26,5
You can find the wiring diagram for connecting a motor and lighting to the CUR/mini unit in the operating manual.
The main advantages of the new CUR/mini unit are:
Easy installation: the unit is installed in a standard mounting cup Ø58mm. Besides, external mounting is also possible with the use of a mounting box (recommended dimensions are 126х126х55,3 mm). For example, you can use the universal mounting box MB/IP55;
Possibility to control lighting.
We remind you that the process of recording, copying, deleting and grouping remote controls (AT-1(S), AT-15(S), AT-4N) is described in detail in the instructions.
ALUTECH Group is constantly expanding the range of devices for automatic control of rolling systems, improving their reliability and usability.